 | |
| Browse | Ask | Answer | Search | Join/Login | |
Front of dryer making metal on metal scrape
Asked Apr 24, 2011, 07:23 AM
—
GE hot point dryer. Front of drum is scraping on the front panel it seems. I can pin point the noise as coming from the area near the blower. It does not appear to be the blower. I have replaced the glide strips and ensured the felt sealer is in seemingly good condition. However I can see some evidence of the drum scraping on the lower parts of the front panel. I cannot find anything that seems to pull the drum up off of that metal. |
Check out some similar questions!
Why does my dryer sound like it is rubbing metal to metal when running. It is only a few years old but we do a lot of laundry
So I am sure this is classic. I went to replace the toilet and when I loosened the screws that hold the toilet down they just broke into pieces, they were very well rusted. The home is ~45 years old. I pulled the old toilet out and scraped the wax off the flange, there were just some very pointy...
I have a 1994 Nissan Altima GXE. I had some brake work and front wheel work done around Christmas time. The control leg, an axle, and some other small things were replaces, along with the entire brake system. However, when I turn left or go in reverse, I hear this shrill, metal on metal sound that...
If I have a brown metal container vs Silver Metal container, which one will keep my hot water warm for a longer period? Why?
View more Appliances questions Search
