Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Drum won't turn, belt good Frigidaire dryer
[ 1 Answers ]
Just replaced heating element on frigidaire dryer fde647rfs0. Put dryer back together and drum will not turn. Motor is turning, and drum turns by hand. But when machine is put back together the belt is not turning the drum. Belt is correct according to schematics. Any suggestions.
Frigidaire Crown Series Dryer--Drum removal
[ 1 Answers ]
I have a Frigidaire Crown Series clothes dryer (Model F31C546CS0). It is approximately 10 years old. The belt has broken and I need help/suggestions. Should I replace the belt or just replace. The unit is in good shape overall but I am concerned that it may be about time to replace it. I...
Screwing rear bearing "plate" onto drum of Frigidaire dryer
[ 3 Answers ]
Hi all, I'm working on my Frigidaire dryer and was looking for any tips/tricks to finishing my project and came across this site. I am replacing the rear bearing (it was squealing incredibly loudly, as well as I was having some tiny pieces of clothing get caught between the front of the drum...
Clothes dryer drum screws fell out; How to align to replace?
[ 1 Answers ]
I've had this happen years ago with another dryer I had, but this one has been tough. Older model Beaumark clothes dryer. Inside the drum, three screws attach the drum through a round metal plate (with circular "vent" holes) and screw into a small circular piece that rotates the drum. Over...
Frigidaire Dryer Drum
[ 1 Answers ]
Right after my dryer drum interior light went out , I noticed that the dryer would no longer automatically stop upon opening the door. I noticed the small button (which I assume stops and starts whenever the door is opened or closed) was completely pushed in. I'm not sure if the two things are... View more questions Search
|