Ask Experts Questions for FREE Help!
 
Free Answers in 3 Easy Steps

Register Now		 3 Steps
 
Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.
  Answer this Question    Ask about Heating & Air Conditioning    Ask about another Subject  
 
PDA

swish_b
Apr 1, 2007, 03:29 PM
The hard start on my carrier ac38cmc030310 is burned out and I'm not sure of how to wire it back in .I had a ac check and the repairman took it out so I did'nt see how the old one was wired also would it work without it. It's only two years old.
There is a blue wire from the harness that goes to the hard start then a blue and yellow off the hard start.??
Thanks Bob
hvac1000
Apr 1, 2007, 06:23 PM
The hard start on my carrier ac38cmc030310 is burned out and I'm not sure of how to wire it back in .I had a ac check and the repairman took it out so I did'nt see how the old one was wired also would it work without it. It's only two years old.
There is a blue wire from the harness that goes to the hard start then a blue and yellow off the hard start.??
Thanks Bob

Here is a GE Adobe diagram.