Ask Experts Questions for FREE Help!
 

Free Answers in 3 Easy Steps

Register Now
3 Steps
 


Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.
  View Answers    Answer this question    Ask a question  
 

vdubya
May 4, 2012, 03:20 PM
I have a rheem self contained gas pack LP heat & AC, i had a tech come look at it this past fall due to heat stop working, well he didnt help much to say the least but i finally figured out it was the gas valve stuck (i live at beach things rust fast) but the ac workied fine before the tech came out, i just turned it back on for the first time and everything cuts on and runs just fine for 2 or 3 minutes and then the blower stops blowing air through the air ducts/vents but everything else still runs fine the compressor outside fan just the blower stops, and it will only cut on after it has been switched off for 30 mins or so and it will work again for a couple of minutes on initial start up what could it be, someone please help.
Thank You,
Vance

T-Top
May 4, 2012, 07:14 PM
To me it sounds like you have a bad run capacitor(cheap part) or a motor over heating and shuting down(not so cheap).

vdubya420
May 4, 2012, 09:58 PM
Is that capacitor the one that the low voltage fan wire connects to, square has about 6 male contacts on it that the wires plug on to? Also ,where is the actual squirrel cage blower fan located at?

Thanks so much fr your help.

vdubya420
May 4, 2012, 10:01 PM
thank you,where is the squirrel cage fan blower located at? and is the capacitor the small square that has the low voltage wire connected to it, it has about 5 or 6 male wire connectors on it for the female wire clasp to connect to. Thanks so much Vance