Ask Experts Questions for FREE Help!
 
Free Answers in 3 Easy Steps

Register Now		 3 Steps
 
Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.
  Answer this Question    Ask about Heating & Air Conditioning    Ask about another Subject  
 
PDA

RPosey
Oct 19, 2009, 08:58 AM
I am firing the heater up for the first time. The ignition kicks in the pilot try’s to light, but the burners will not light. I do see a flame at the pilot when trying light. I think it is the ignition module, but I do not know how to test it.

I have tried to turn the thermostat to lowest setting to reset
I have check for loose wires
I confirmed the gas is on
hvac1000
Oct 19, 2009, 09:37 AM
Brand and EXACT model number??
RPosey
Oct 19, 2009, 09:49 AM
Brand / Trane
Model # / YCC0301L0BA

I have taken the ignition module off and there are 2 components that are burnt.
hvac1000
Oct 19, 2009, 10:01 AM
If there are burnt components on the circuit board that will need to be replaced.