Ask Experts Questions for FREE Help!
 
Free Answers in 3 Easy Steps

Register Now		 3 Steps
 
Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.
  Answer this Question    Ask about Tools & Power Equipment    Ask about another Subject  
 
PDA

jfhsr
Oct 14, 2009, 06:48 AM
How do I change drive belt on a John Deere LT155 Lawn tractor
crigby
Oct 14, 2009, 06:56 AM
Hi,
Are you speaking of the deck drive belt or the motion drive belt? That machine has three serial number breaks, none of which apply to the motion drive belt, but do if the machine is equipped with a 38" deck or Freedom42 deck since there are two of each.
Peace,
Clarke
jfhsr
Oct 14, 2009, 07:19 AM
Hi,
Are you speaking of the deck drive belt or the motion drive belt? That machine has three serial number breaks, none of which apply to the motion drive belt, but do if the machine is equipped with a 38" deck or Freedom42 deck since there are two of each.
Peace,
Clarke

Hi, Thanks for responding. It is the motion drive belt. It has the38" deck. It Looses forward motion going up a hill, but not power. Thanks, Jim
crigby
Oct 14, 2009, 07:30 AM
Hi,
Here is a picture, and the manual online for the final serail number break is at:
John Deere Ag - New Equipment: Technical Publications - Equipment Search (http://www.deere.com/en_US/ProductCatalog/HO/servlet/servlet/com.deere.u90785.cce.productcatalog.view.servlets.PublicationsSearchServlet?tM=HO)
Easier with deck removed. Lock brake, remove nut and guide on flat idler, loosen idler near engine, install at rear first, then front, then at idlers, tighten idler at engine, unlock brake and check routing, put nut and guide back on and reinstall deck.
Peace,
Clarke