Ask Experts Questions for FREE Help!
 
Free Answers in 3 Easy Steps

Register Now		 3 Steps
 
Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.
  Answer this Question    Ask about Heating & Air Conditioning    Ask about another Subject  
 
PDA

jhammond50
Jan 15, 2009, 06:36 PM
My Bryant furnace cycles several times before it will reach the set temp on the stat?
MarkwithaK
Jan 15, 2009, 06:38 PM
What is the condition of the filter?
jhammond50
Jan 15, 2009, 06:44 PM
Changed before XMAS
hvac1000
Jan 15, 2009, 06:53 PM
Watch the furnace when it cycles. If the burner actually goes out then you have a weak limit control or the furnace is overheating causing the burner to cut out.

OR post the exact model of your thermostat. If it is in recovery mode this can happen.
T-Top
Jan 15, 2009, 06:57 PM
you should have a flashing light telling you if you have a fault. check the small round window on the blower door of the furnace, you should see a flashing red light.