Hi

I am looking for an installation manual for a 20KW Lincoln Electric furnace.

Tried google but nothing comes up?

Thanks

John

Good luck finding one. Lincoln furnace was a small manufacturer that was more of assembly point. They made the cabinets BUT all the components that went into the furnace were off the shelf. All parts for there furnaces are available but you will just need the original part number off the parts to get them Or know enough about electric furnaces to know what to use in the original parts place.

Lincon put a wiring diagram on the back side of the blower door access panel and the clerance to combustibles is listed on the model number tag as required by law.

Sorry but that is all I know about Lincoln.

For thermostat control would you think the low voltage side terminal block would be wired to the thermostat as other electric furnaces as no control side wiring diagram with the furnace.

Are Lincoln now out of business as this was manufactured in 2005?

Thanks brother!

John

First look on the model number label and post the address and state along with the exact model number where lincoln is now located. By law it is required to be there with the model number.

The low voltage for heat only should be the R=Red and W=white terminals on the low volt wiring strip. if blower control terminal is available it will be the G=green terminal.

There is no address just "Made in Canada" The model number is FEM20-M2401AM-A.
Power is 20KW

Thanks
John

Sorry no help here. I have looked thru all my electronic model ID's.