Ask Experts Questions for FREE Help!
 
Free Answers in 3 Easy Steps

Register Now		 3 Steps
 
Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.
  Answer this Question    Ask about Heating & Air Conditioning    Ask about another Subject  
 
PDA

mac777daddy
Nov 22, 2008, 12:03 PM
I have an Amana Gas Furnace question. The furnace comes on and the flame starts. It does not appear that the blower ever starts because when I put my hand in front of the vents no air is blowing out. What should I check? This is an AMANA GAS FURNACE 80SV. Thanks
hvac1000
Nov 22, 2008, 12:12 PM
If the flame stays on and no blower it is usually the fan and limit switch or relay depending upon the setup. It could also be the blower motor. You will have to use a meter to test. The wiring diagram is on the back side of the blower door.
mac777daddy
Nov 22, 2008, 12:14 PM
There is a little motor that looks to be some sort of fan that spin just above the flame unit. That is spinning. Is there another blower I can check to see if it is working?
hvac1000
Nov 22, 2008, 12:19 PM
Yes the main blower that blows the air around in your home