I have a York Diamond 90 furnace. When I turned it on for the winter, it starts but only runs for a minute and then shuts off but the blower still runs. When I checked the status light it blinks four times which according to the panel indicates "High Aux or Spill Limit Switch Open"

I am handy but dont have much experience wiht this furnace. Can anyone help?

Thanks!
Schuyler

There is a wiring diagram and legend on the inside of the blower. Track down the problem device and test or replace.

It says the code is the high Aux or spill limit switch open where is it at

Follow the wiring diagram that is located on the back sie of the blower door.