Ask Experts Questions for FREE Help!
 
Free Answers in 3 Easy Steps

Register Now		 3 Steps
 
Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.
  Answer this Question    Ask about Heating & Air Conditioning    Ask about another Subject  
 
PDA

allis39
Mar 9, 2008, 02:32 PM
How would I jump the pump so it will long enough for me to prime it?
hvac1000
Mar 9, 2008, 02:48 PM
You do not jump the pump. First do you know how to bleed the pump correctly using the bleeder screw on the pump?
allis39
Mar 9, 2008, 03:09 PM
I was in the process of bleeding it. Now the indicator light flashes and even with pushing the red button it will not run again.
hvac1000
Mar 9, 2008, 03:55 PM
Turn off power to furnace for 5 minutes then turn back on. Then try to reset again.