I have a Maytag Neptune Dryer MDL# MDE5500AZW I took it apart to recover a piece of jewellery and put it back together without attaching the wiring lines back to the door switch.:o I can not remember how they re-attach. As I assume one is a ground and the other two are power feeds... I do not want to attempt this without knowing. There are 3 prongs and three wiring lines. Can anyone tell how they go back on or suggest somewhere to find out?

Call one of your local either repair shops or dryer places they should be able to help no problem. I had some problems with my wires and tried to go get a harness. They should be able to help. Well needless to say my dryer wiring caught on fire and it was the wires it had been working fine for about a year. My bofriend went out to the garage and we had a foot high of flames under the dryer not to mention it was right next to our gas line. If we would have let it go any longer the whole house would have blowen up. So I would definitely be careful call a repair shop. Good luck