We have a Goodman furance that will not produce heat. The pilot light is on, the gas is released, but the burners will not kick in. Do you have any idea what is causing this problem.:confused:

Scott's Chicago

Does it have a thermocouple?

I had a very similar problem and that is what fixed it.

They just wear out and need to be replaced.

Mine was easy enough to do myself, not sure about yours, if you don't have much knowledge in this area I urge caution as gas appliances do have a high degree of danger involved.

Good Luck.

is the pilot flame high or tall enough to ignite the burners,?,the pilot should be at least an inch tall,and a nice uniform flame,the pilot may need cleaning or replaced, are you sure the gas is turned on at the gas valve,and not turned to pilot only,,,,if the thermocouple was bad you probably wouldn`t have a working pilot

Not necessarily so wmproop, my pilot worked just fine, but the thermocouple was keeping the burner from lighting. I guess if they go completely bad, it would shut down the pilot, but if they get weak, or old, without going completely bad, the pilot still burns? One note, my furnace is an old Luxaire, probably about 35 to 45 years old if that makes any difference.