I replace the heating elament and still not working only works for 2-3 minutes and shots off after with the clothes:eek: non drying.

I assume that this is an electric clothes dryer. There are two temperature sensors. Rather than trying to figure out which one is defective just replace both. They are usually round about 1" in diameter and have tabs on either side for mounting screws.

This site has some good -- how to do it details

Appliance repairs, Appliancehelp, Appliances, repairs to dryers washers dishwashers fridges repairs microwaves ge maytag kenmore frigidaire westinghouse inglis, appliance how to take apart information, purchasing an appliance help, model number help, (http://www.applianceaid.com/)

Check it out -- Good Luck

i replace the heating elament and still not working only works for 2-3 minutes and shots off after with the clothes:eek: non drying.
OK the dryer stays on about 5 minutes heat comes out because I chnge the element but don't finish the drying cyrcle do you know what I have to change next.:confused: :confused: :confused: :confused: :confused:

Either your timer is bad or the temperature sensor is bad. Does it run for the entire time you set just not heating near the end or does it shut off completely and do nothing?