There is a roll over switch over the burner opening that keeps tripping and when you look at the burners the first one has overflow going around the bottom and top. Is this a adjustment of the pressure regulator on the control valve?

Check for a plugged vent/chimny. Something is preventing the flue gas outflow.

My Furnance Does Not Stay On Long Enough To Heat My Home And Its Hard To Program The Thermostat?

You may have dirty or rusted out burners, remove the burners and inspect them, you should have a strong blue flame (no yellow, no shoot) This is a dangerous condition and should not be operated untill it is repaired, Good luck, Mike