bergeronn
Sep 24, 2007, 06:36 PM
I'm upgrading from a Janitrol HPT 18-60 thermostat to a Hunter 44110 Thermostat.
The wiring for the Janitrol is:
Y = Yellow wire
G = Green wire
R = Red wire
O = Orange wire
W2 = White wire
E = Black wire
C = Blue wire
The wiring diagram for the Hunter is:
RH = ???
RC = ???
G = ???
Y/O = ???
W/B = ???
I did hook up the Red wire to the RH with a jumper to the RC, the Green wire to the G, Yellow wire to the Y/O, and white wire to the W/B. I capped off the Blue Wire, Black Wire, and Yellow Wire. The system did come on, but it only blew out warm air and it was on cool. Do I have to hook up the orange wire with the yellow wire? If not, what is the correct wiring hookup for the Hunters system? Any help will be greatly appreciated. Thank you.
Chase
The wiring for the Janitrol is:
Y = Yellow wire
G = Green wire
R = Red wire
O = Orange wire
W2 = White wire
E = Black wire
C = Blue wire
The wiring diagram for the Hunter is:
RH = ???
RC = ???
G = ???
Y/O = ???
W/B = ???
I did hook up the Red wire to the RH with a jumper to the RC, the Green wire to the G, Yellow wire to the Y/O, and white wire to the W/B. I capped off the Blue Wire, Black Wire, and Yellow Wire. The system did come on, but it only blew out warm air and it was on cool. Do I have to hook up the orange wire with the yellow wire? If not, what is the correct wiring hookup for the Hunters system? Any help will be greatly appreciated. Thank you.
Chase