Ask Experts Questions for FREE Help !
Ask
    RailRoadX's Avatar
    RailRoadX Posts: 3, Reputation: 1
    New Member
     
    #1

    Aug 12, 2017, 02:07 PM
    Electrical/Electronic
    My wife's elliptical machine's fan only starts/cranks in all three speeds and will not run and dies after cranking. I tried/purchased a new fan and encountered the same result. Could this be the electronic board (diode/capacitor)? The fan is a small 12v DC brushless motor type.

    Can anyone out there shed some light on this for me?

    Thanks,
    RRX
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Aug 13, 2017, 02:18 AM
    No expert on these, but it does sound like it might be the main board. Try tracing the wiring, I bet it goes back to it.
    RailRoadX's Avatar
    RailRoadX Posts: 3, Reputation: 1
    New Member
     
    #3

    Aug 13, 2017, 10:47 AM
    Smoothy:

    Yes, it does.

    Thanks.
    RRX
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Aug 13, 2017, 08:34 PM
    If it only runs when cranking? Is that pedaling? Pedaling may charge/produce power. Or maybe a Low Battery or Power supply problem. More info?
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
     
    #5

    Aug 13, 2017, 09:22 PM
    Without an ohmmeter you're just guessing at the problem.
    RailRoadX's Avatar
    RailRoadX Posts: 3, Reputation: 1
    New Member
     
    #6

    Aug 14, 2017, 07:05 AM
    No, it is powered by 120. No pedaling involved.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #7

    Aug 18, 2017, 08:48 AM
    Can you provide a Model Number? I thought they were like exercise machines. Sounds like you sit one it and it moves your legs? If so. I would probably unplug and get a better workout. I tend to do things the hard way. Is Cranking similar to Pedaling.
    I can troubleshoot most things, need to know more, I have been fortunate? To not need one, My Job gives me a workout. Model Number? Thanks

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the virginia electrical code number restricting a electrical box in a closet [ 3 Answers ]

Need to now the code in virginia by number On the placement of a circuit box in a clooset

Kitchen Electrical - Gas Range with Electronic Pilot [ 2 Answers ]

Hello, Can anyone tell me if there are any limitations to where I can place the outlet for a gas range with electronic pilot. I want to place it behind the range.. Does it have to be a certain distance from the gas line? Can it be on one of the two kitchen circuits or does it need its own? ...

Is Computer Science a fair option to Electrical & Electronic students in MTech? [ 0 Answers ]

I am a BTech 3rd year student in K.L.University( Vijaywada, Andhra Pradesh).I am currently perceiving Electrical and Electronics Engineering .But I have a profound interest in learning Computer Sciences from my childhood.Can I opt for Computer Sciences in Mtech program which is completely a choice...

Can substandard electrical wiring installation at home produce electrical arching [ 6 Answers ]

Can substandard electrical wiring installation at home produce electrical arching? Then fire?


View more questions Search