Ask Experts Questions for FREE Help !
Ask
    Karilynette72's Avatar
    Karilynette72 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 21, 2016, 04:07 PM
    Overhead Garage door 45A
    How do I program my remote?

Check out some similar questions!

Overhead garage door 45A [ 14 Answers ]

Garage door opener works fine. Opens from wall. Need to know where the remote code is in the opener since the remote works fine. Took off cover and cannot find schematic for where the code for the remote is inside the opener. Need the coding for the remote or where it's located in the unit.

Overhead door opener model 45a [ 0 Answers ]

We have a 1987 overhead door opener model 45a. Trying to install a new remote opener. We have set the dip switches to the same as the old remote but it still will not learn the code. The opener itself does not have dip switches or a learn button. Is there any other thing that needs to be done?

OverHead Door #45A? [ 0 Answers ]

I have a Overhead Door model 45A that has and old touch n go remote. There isn't a learn button or dip switches in the unit or the remote. It's a 390-LCC frequency. The original remote only works occasionally so I bought the recommended replacement with the 9 dip switches and we can't figure out...

Overhead garage door opener model 45A [ 3 Answers ]

I have a overhead door model 45A it opens the door fine, but slides back about a foot after its opened. When trying to close the motor hums but won't engage to close. Any hints on adjusting it to correct problem? Thanks

Overhead garage door 45A [ 5 Answers ]


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.