 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Thinking of buying a power inverter to install on a vehicle to use for back up power to run my GMP 100 furnace during power outages. Will a modified sine wave inverter work OK and not damage the circuitry or do I need a pure sine wave? Also how many watts does the furnace draw?
Thinking of buying a power inverter to install on a vehicle to use for back up power to run my GMP 100 furnace during power outages. Will a modified sine wave inverter work OK and not damage the circuitry or do I need a pure sine wave? Also how many watts does the furnace draw?
The fan kicks on but the unit does not fire.. just blows cold air... light on board blinks 4 times
Hello everyone, I have an issue with my furnace. It just recently started happening, when running the ac the unit gets to the set temperature and then the unit clicks as if where going off and clicks again and keeps running. I looked inside and didn't see the status light blink.. Any help here?
I have a Goodman GMP 100-4 running on propane The last week or so, has seen some intermittent operation. The draft inducement motor comes on but at times no ignition occurs. Vacuum manually applied to the vacuum switch results in ignition taking place. Inducement motor area has been cleaned out....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
