Ask Experts Questions for FREE Help !
Ask
    Shiena's Avatar
    Shiena Posts: 2, Reputation: 2
    New Member
     
    #1

    Jun 22, 2007, 10:48 AM
    Six Sigma Analyze Phase
    As I am carryout a Six sigma project and have completed my Measure Phase, I would like to know what are the various tools available in the Analyze Phase to review discrete data.

    Thank you in advance for your support and assistance.
    inferstat's Avatar
    inferstat Posts: 1, Reputation: 1
    New Member
     
    #2

    Oct 27, 2007, 08:53 AM
    By review of discrete data if you mean analyzing discrete data, following tools can be used depending upon the number of discrete variables involved.

    - Pareto Diagram
    - Chisquare Test
    - Stratification
    - Dot Plot
    sixsigmais's Avatar
    sixsigmais Posts: 6, Reputation: 1
    New Member
     
    #3

    Aug 24, 2009, 03:13 AM

    You can use QC 7 tools, source of variances or T-test to analyse the data.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Difference between single phase and 3-phase motors [ 4 Answers ]

Difference between single phase and 3-phase motors

2-phase vs 3-phase degrees of separation [ 5 Answers ]

At work we have 3-phase power. I understand the oscillations are 120 degrees apart. At home I have 2-phase power. Are the oscillations 180 degrees apart? I understand the neutral on a 240v circuit should carry 0 as the phases cancel each other out. My real question is that if we have a...

How am I going to size my 3 phase X'mer with 1 phase load using current as reference [ 3 Answers ]

Hi, I'm Peping: I have 90 pieces of single phase loads with current of 2 Amperes. This will be loaded to a 3 phase transformer, Wye connected having a line to line voltage of 220 Volts. What will be the size of the transformer required for the mentioned loads? Many thanks, Peping


View more questions Search