Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Non bearing wall stud boring options.
[ 3 Answers ]
I recently had my electrical panel moved. I have a plumbing reference that indicated I could bore a 2.5” hole in a 2x4 non-bearing stud. I framed a small portion of a wall in the basement to house the electrical panel but because of space constraints I also had to run a washing machine drain...
Smooth out a concrete basement wall
[ 1 Answers ]
I am remodeling my basement and when I took down the sheetrock under a window that obviously had been leaking for years, I found the concrete under it crumbling and coming apart. I bought some quikrete to patch it but now the wall is very lumpy. I would like to know the best way to smooth out the...
Stud wall brace required or not
[ 2 Answers ]
We are having a home built and we have 9 to 10 foot ceilings throughout. During framing there were metal strips nailed instead of using the old 2x4 braces. These were done on some of the inside walls but not all of them. It seems that any wall that runs from left to right looking in from the door...
Shower Base secure against wall stud?
[ 1 Answers ]
Well, I was just thinking, since I recently learned that the manufacturer's instructions for shower installation is total garbage; I am worried that maybe some other stuff I should double check. Should I secure my shower base against the studs in the wall? My shower is neo-angle with a...
Stud wall: Do I need cross pieces?
[ 6 Answers ]
Just finished part1 of a Honeydo project: Stud wall 20' long with a door near one end. I'll do the drywall next weekend... Currently it's all vertical studs, with the exception of the horizontal above the pre-hung door. I'll be drywalling both sides. Are cross pieces necessary? Thanks! View more questions Search
|