Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Build Shower Platform & Install Above Ground P-Trap in Basement Shower
[ 1 Answers ]
Hello, I'm new to this site. I tried to find the answer in previous posts and did find some great info, but I still have some questions :) This is what I want to do: Install a corner shower with dimensions 36" in x 36" in the basement, build a platform, & add an above ground p-trap. ...
My shower drain is raised above the shower pan by 3/16" causing standing water
[ 2 Answers ]
I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...
Water runs through sprout when shower head is turned on
[ 1 Answers ]
My bathroom shower exhibits this peculiar behavior. When I turn the shower on, water runs through the spout (as expected). As soon as I lift the divertor up, water flows from the shower head (as expected). However, at the same time, I do see fairly decent flow of water continue to run through the...
Replace shower Plumbing Valve assembly shower head 2 knobs
[ 3 Answers ]
In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that... View more questions Search
|