Ask Experts Questions for FREE Help !
Ask
    superczech's Avatar
    superczech Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 13, 2008, 04:16 PM
    Nedd fault codes for Coleman Evcon Furnace
    I have a Evcon furnace model DGAA056BDTB and the cover plate for the controls box is missing. I am told that the fault codes were on the back of the plate. Where can I get a replacement cover or at least get the fault codes for my furnace?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 13, 2008, 04:27 PM
    List under coleman

    mobilehomerepair.com :: Index
    superczech's Avatar
    superczech Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 14, 2008, 08:52 AM
    Thanks hvac1000! Got the codes from Mike at Mobil Home Repair.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Jan 14, 2008, 08:58 AM
    Quote Originally Posted by superczech
    Thanks hvac1000! Got the codes from Mike at Mobil Home Repair.
    Good deal.
    sshuntsherry's Avatar
    sshuntsherry Posts: 1, Reputation: 1
    New Member
     
    #5

    Dec 17, 2010, 04:37 PM
    Looking for the code 5 warning

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman evcon furnace [ 5 Answers ]

My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls...

Blower during furnace operation on electric Coleman Evcon [ 2 Answers ]

I just installed a programmable thermostat for an electric Coleman Evcon furnace. Now when the furnace comes on the blower also comes on. Sometimes the blower goes off a minute or so before the furnace stops. It never did this before- in fact I didn't even know there was a blower. Do I need to...

Centrifugal- Won't come on Coleman-Evcon Furnace- [ 2 Answers ]

Hi, Just found your site today-yipee! I have a problem with my Coleman-Evcon furnace (it has had A/C added)-just bought the house this year, but previous occupants said all was working before. When I turn on the heat on the thermostat, I get a code 3 readout, "Centrifugal Swithch Open"; I had...

Coleman, Evcon Ignition Failure [ 1 Answers ]

A couple of years ago, there was a recall on a part that a Company had to come out and replace. I had never had a problem with the furnace for 8 years. A short time later, I started having problems with ignition failure. I had a part replaced and a licensed Company went over everything and said...

Coleman evcon [ 2 Answers ]

Fan won't come on in heat position


View more questions Search