Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rh & W wires mixed, 2 wire heating
[ 8 Answers ]
Hope someone can help! Labman you've touched on this but I want to be sure. I have a simple baseboard heater connected to an old analog thermostat with no labeling or HVAC color coding, and I would like to install a new programmable thermostat with only the Rh and W connected - I am using...
Double wires on a single wire breaker
[ 3 Answers ]
Hi, My home inspector put the following in my inspection report and I would like to know if anyone know the possible solutions, including the lower cost ones. Also, does this create any danger or fire hazard? * the two improper double feeds in the sub panel in the Laundry where two...
Thermostat Wires - Only 2 Wires (both black)
[ 4 Answers ]
Hi there, I'm switching my thermostat for a newer digital one, though when I took out the old thermostat, there were only 2 black wires with white stripes on them. The new thermostat calls for an RH wire and a W wire, but I have no way of distinguishing the two apart. How can I tell which wire...
5-wire thermostat - LOST a few wire labels. HELP!
[ 2 Answers ]
I am installing a programmable thermostat (upgrading from a previous programmable that wasn't to our liking. When taking the old thermostat off, I noticed 4 of the 5 wires were labelled. That's a good thing. HOWEVER, when I took the old baseplate off, 2 of the labels fell off (not sure from...
Wiring a 2 wire thermostat to a 4 wire system
[ 1 Answers ]
I have a gas furnace equipped with central air.The compressor is shot in the AC unit,and I needed to replace the thermostat so I bought a heating only thermostat.I have the blower and the w wires together on the w terminal designation and the rh on the r terminal designation, and I have the y wire... View more questions Search
|