Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to Wire a Thermostat to blower fan for alternate heat source
[ 5 Answers ]
Hello all I just built a plenum around my coal stove and I need to wire in a stat , limit switch to run a blower fan . Thanks Steve PS I have all the parts off and hot air oil furnace.
How to wire a heat pump & varialble air handler
[ 2 Answers ]
Please help how to wire a Goodman 13seer 1.5 ton heat pump and 2.5 ton variable speed air handler to a EWC BMplus 3000 Zoning control system. Thanks, Alo:confused:
Yikes! A/C comes on; No heat (no green wire either)
[ 3 Answers ]
I'm replacing an older Honeywell thermostat with a new programmable Noma/UPM model THM501. There are 4 wires - red, yellow, white and blue. On the Honeywell the blue wire was on the "G" terminal - all worked well. I wired up the new one the same way. However, although the new thermostat shows the...
Wiring a 2 wire thermostat to a 4 wire system
[ 1 Answers ]
I have a gas furnace equipped with central air.The compressor is shot in the AC unit,and I needed to replace the thermostat so I bought a heating only thermostat.I have the blower and the w wires together on the w terminal designation and the rh on the r terminal designation, and I have the y wire...
Wire colors for heat pump thermostat
[ 1 Answers ]
While installing a programmable therostat, two of the indentification stickers fell off the wires. The wires colors are blue and brown and I don't want to hook them up wrong. The "ports" are E and C. Any help would greatly be appreciated. Thanks View more questions Search
|