Ask Experts Questions for FREE Help !
Ask
    RayJackjr's Avatar
    RayJackjr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 23, 2009, 06:44 PM
    Scotts riding lawnmower by John Deere Belt Diagram
    I need belt routing diagram (tractor and mower blade) for a Scotts riding lawnmower by John Deere. It is a 16Hp kohler command engine with a 42 in mower deck (2 belts). Where can I find a routing diagram?
    Thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 23, 2009, 07:00 PM

    Hi,
    Just gave this to someone else, but manual is here:
    Scotts Lawn Tractor Operator's Manual | ManualsOnline
    And picture is attached.
    Peace,
    Clarke
    Attached Images
     
    danny smith's Avatar
    danny smith Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jun 17, 2012, 12:33 PM
    Need to see picture of the top belt
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Jul 8, 2012, 07:56 PM
    Hi,
    Then you refer to the motion drive belt.
    Peace,
    Clarke
    Attached Images
     
    whiteduster45's Avatar
    whiteduster45 Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Jun 18, 2013, 06:37 PM
    I have a scotts by John Deere with 42" deck, originally had a 17 hp Briggs but it was blwn when the guy gave me the mower. I put in a Briggs 14.5 hp which runs fineand cuts very well. My problem is the deck drive belt. The part number under the hood is 1/2" x 115 5/8" it is way too long. I tried a 114" still too long and a 112" which is too short by a little. The last one that I used was 1/2" x 113 1/2" When it broke. It was used almost three (3) months. When it broke the belt had just enough wear to get rid of the belt numberwith no nicks, cuts or abrasions. The only damaged area was the point where it looks like it pulled apart.

    Any sugestions as to what brand, type or size belt I could use that might last a full summer?

    Thanks Glen
    Loadmaster158's Avatar
    Loadmaster158 Posts: 3, Reputation: 1
    New Member
    		  
    #6

    Jun 24, 2013, 08:01 AM
    You need a 95.87 Length, 5 " width, KEVLAR (32deg, 031 thick) cross ref # GX10851.
    Loadmaster158's Avatar
    Loadmaster158 Posts: 3, Reputation: 1
    New Member
    		  
    #7

    Jun 24, 2013, 08:14 AM
    Whiteduster, I may have misread. Do you mean the Hydro drive belt or the mower deck belt?
    Loadmaster158's Avatar
    Loadmaster158 Posts: 3, Reputation: 1
    New Member
    		  
    #8

    Jun 24, 2013, 08:18 AM
    You may want to check your pulleys to see if any are seized while you are replacing the belt.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Belt Diagram for John Deere 165 Hydro riding mower [ 3 Answers ]

I need a belt diagram for the primary and secondary belts of a John Deere 165 Hydro riding lawn mower with a 38 inch deck and electro magnetic clutch.

Belt routing for john Deere riding lawnmower. [ 12 Answers ]

I need belt routing for a Scotts riding lawnmower by John Deere. It is a 16Hp with a 42 in mower deck. Where can I find a routing diagram.

Belt Diagram on John Deere Scott Riding mower [ 5 Answers ]

How do you change the large belt on the John Deere Scott Mower with a 54" deck?

Belt Replacement Schematics for a John Deere Riding Lawnmower [ 1 Answers ]

I need a diagram for replacing the mower belt on a John Deere LT-115. It has a 38" mower deck

Drive Belt for a John Deere 68 Riding Lawnmower [ 1 Answers ]

I have four questions for this one. 1. What size belt drive belt will the John Deere 68 need? 2. How do I install it? 3. Where can I get it? 4. And is there possibly a manual for this mower anywhere? Thanks. :)

View more questions Search