Ask Experts Questions for FREE Help !
Ask
    LeslieBN's Avatar
    LeslieBN Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 11, 2008, 05:46 PM
    Honeywell Thermostat RTH230B Blinking Battery Icon
    We changed batteries in our thermostat when the blinking battery icon came on but the icon never stopped blinking and we don't have any heat. The fan comes on but nothing else. We purchased an new thermostat (same model) and no change. Same blinking light. What does this mean? Is it a thermostat problem? A wiring problem? Or, God forbid, a heater problem?

    I appreciate any feedback you can give me. LeslieBN:confused:
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Nov 11, 2008, 05:54 PM

    Would start by replacing batterys one more time, if no help take new thremostat back and get another. Thermostats may sit on a shelf for some time, therefore, the batteries that come with them may be dead when you purchase the thermostat. Just start by replacing batterys with new batterys that are new from the hardware store. If this doesn't fix problem, let me know and we will take it one step at a time. What style of themostat do you have?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #3

    Nov 11, 2008, 09:11 PM
    3.7 Battery Replacement Indicator
    An icon appears when the batteries need replacement.
    This icon will flash for 120 days, then the thermostat
    will cut power to the heating/cooling unit. The icon disappears
    once the batteries are replaced.
    After replacing the batteries, readjust the time and day (see section
    5.1). However, the temperature and program settings are saved and
    do not need to be re-entered.
    Warning: Before removing the batteries, place the
    system switch on the thermostat to Off. Otherwise, the
    heating/cooling unit might still be running even after
    The batteries are removed.

    Make sure the new batterys are good. Before batterys are replaced turn the power off then replace batterys. Then turn power back on. Make sure you are installing the batterys correctly. Pay attention to the + and - signs and how to place them in the thermostat. This will also cause problems.

    Your owners manual below.

    http://customer.honeywell.com/techli...0s/69-1800.pdf
    ChrisEliop's Avatar
    ChrisEliop Posts: 1, Reputation: 1
    New Member
     
    #4

    Jan 18, 2009, 07:34 AM
    Quote Originally Posted by LeslieBN View Post
    We changed batteries in our thermostat when the blinking battery icon came on but the icon never stopped blinking and we don't have any heat. The fan comes on but nothing else. We purchased an new thermostat (same model) and no change. Same blinking light. What does this mean? Is it a thermostat problem? A wiring problem? or, God forbid, a heater problem?

    I appreciate any feedback you can give me. LeslieBN:confused:

    Leslie - did you ever get a fix for this problem? I've got the same problem and haven't seen anything in the responses that fixes my problem.
    Wondering?
    DougPalmer's Avatar
    DougPalmer Posts: 1, Reputation: 1
    New Member
     
    #5

    Mar 14, 2009, 05:12 PM
    HTML Code:
    <p style="text-indent: 0.5in;" >
    Short answer:  In accord with the <a href="http://customer.honeywell.com/techlit/pdf/69-0000s/69-1800.pdf" >web instruction PDF file</a>, 2 x AA-battery replacement worked according to design.  Therefore, the value of this post is to merely reaffirm that the instructions are correct with respect to batteries [2 x AA] replacement in response to blinking battery icon warning.
    </p>
    <p style="text-indent: 0.5in;" >
    Longer answer:  Further, in accord with the instructions, reconfiguration merely consisted of entering real time [hour, minute, and day-of-the-week].  My previously entered set points had been retained, I'm pleased to report.
    </p>
    <p style="text-indent: 0.5in;" >
    Good luck in getting the thermostat to operate correctly in both heat and cool modes.
    </p>
    moertel's Avatar
    moertel Posts: 1, Reputation: 1
    New Member
     
    #6

    Feb 21, 2011, 06:40 PM
    I had this installed at my old house, no problem.
    New house, battery blinks.
    Replaced batteries, checked batteries. Still Blinks.
    Set Time/Day, didn't go away.
    Two wire setup (red/white), removed jumper. The other jumper is set to gas, just like it should be. There aren't too many other things I can mess with on this. I don't really see any solution above, when good batteries are installed, and there is still an issue.
    Did everyone else find that new batteries solved this?
    acorrow's Avatar
    acorrow Posts: 1, Reputation: 1
    New Member
     
    #7

    Oct 28, 2011, 10:38 AM
    In case anyone is still having this issue, it turned out for me that even a brand new set of Rechargables kept this light on. As soon as I got a pack of Alkaline's... BOOM... Problem solved, and my heat is on.

    Don't use rechargables in this thing...
    jek12345's Avatar
    jek12345 Posts: 1, Reputation: 1
    New Member
     
    #8

    Oct 9, 2012, 04:48 PM
    I had the same issues. Brand new, non-rechargable batteries and still flashing. I inserted the batteries backwards, waited 15 seconds, inserted them correctly and no more flashing.
    homewifey's Avatar
    homewifey Posts: 1, Reputation: 1
    New Member
     
    #9

    Nov 27, 2012, 08:18 PM
    This happened after a storm... tried everything from cleaning chargets to removing and trying a hard reset by removing the wires that connected it. I almost gave up because I thought it might be the furnace and snow came so then one last attempt with taking out the be batteries again and placing them in backwards AGAIN only this time left them in for over 30 minutes as opposed to 5 and finally the light stopped blinking and got my heat back on. Once I started to program the light started blinking again but the heat is still running strong so will probably buy new thetmostat soon.
    blinkboarder85's Avatar
    blinkboarder85 Posts: 1, Reputation: 1
    New Member
     
    #10

    Dec 22, 2012, 11:08 AM
    "I had the same issues. Brand new, non-rechargable batteries and still flashing. I inserted the batteries backwards, waited 15 seconds, inserted them correctly and no more flashing."

    Putting regular batteries in it solved the issue for me! Rechargeable do not work!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell RTH110B Thermostat Blinking Signal [ 1 Answers ]

I replaced the batteries in my Honeywell RTH110B thermostat with the air conditioning running contrary to the instructions that I read afterward. I am now getting a blinking snowflake air conditioning symbol but no air. How can I fix this problem? Thanks

Honeywell rth230b thermostat [ 2 Answers ]

I am trying to install a honeywell thermostat model # rth230b, I have 5 wires from my old unit... labeled r,g,y1,w1,w2. I don't know how to wire up the w1-w2. Do I put them both on the w peg, or what ? Please help.

Honeywell Thermostat RTH230B [ 1 Answers ]

I bought a simple 5/2 programmable thermostat from Home Depot. Does anyone know how to set the temperature to vacation HOLD on this unit?

Honeywell RTH230B Thermostat [ 1 Answers ]

I recently installed Honeywell #RTH230B thermostat to replace and old Honeywell # T87F( old round non digitital type). I have oil burner with basebaord water heat. Since my olf thermostat was 2 wire only and I have no AC I pulled the jumper wire between Rh and Rc as per the instructions. Thj9is...


View more questions Search