Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring indoor halogen lights - tandem
[ 4 Answers ]
I have two halogen pendant lights to one switch. One light will not work. I replaced the transformer and no luck. My electrical tester is positive on the working light when the switch is on but not on the non working light. When the switch is the tester is positive on the bad light. What is wired...
Pendant light with single wire and metal sheath
[ 0 Answers ]
I have two pendant lights hanging by a cord consisting of a single wire held in a metal sheath. The wire attaches to the wire in the ceiling, and the sheath twists off and attaches to the other wire in the ceiling. It was working before, but I dismantled it to replace the shade. The halogen bulb...
Track Lighting: 6 pendant lights/4 sections of track 2 lights not working?
[ 4 Answers ]
Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilą! Light. About 3 days later the first one blew again and then the...
Need to wire a pendant light with 100 watt bulb. Do I use 12, 14 or 16 gauge wire?
[ 1 Answers ]
I want to rewire a floor lamp with 100 W bulb. Do I use 12, 14 or 16 gauge wire?
Wiring three pendant lights
[ 2 Answers ]
I am trying to wire in three pendant light fixtures into our new home above the breakfast bar. There are three junction boxes already wired in when we bought the house, but no lights. In the first two boxes there are two sets of wires coming out two black gromets. In each set of wires there is a... View more questions Search
|