Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace thermostat needs 24 v wire
[ 6 Answers ]
My new White Rogers programmable furnace stat says it needs 24 v dc to run it. I installed it and am using the 2 AA batteries to power it, but I have 4 wires coming in now. I have A/C. The stat is running OK now but if I take the batteries out the display goes dead. I don't know how to run 24 v...
Goodman furnace guso50-2 thermostat wiring instructions for 2 wire thermostat
[ 2 Answers ]
Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?
How do I jumper a TX500B Thermostat, bypass the therm. To see if it's working?
[ 6 Answers ]
I hear the thermastat click when I raise the setpoint above the measured temp, but nothing happens. I want to jumper out the therm. just to eliminate it as the problem. From left to right - I have G, Y, W, RH & RC - there is a jumper from RH to RC, with a red wire connected. I do read 28 VAC from...
Honeywell thermostat pro 8000, Why remove jumper wire?
[ 2 Answers ]
I'm trying to install a HoneyWell digital thermostat Pro 8000, part number TH8320U108 for my Rudd and Rheem heating and a/c system. The Rudd Furnace is a plain Silhouette and the Rheem a/c is a model 3765SA17. All of the wiring hook up points from the old Honeywell thermostat match the new... View more questions Search
|