Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing a hunter ceiling fan & light control to operate my fan w/light
[ 3 Answers ]
I just replace my kitchen light with a new ceiling fan w/light. I now was going to try to install my hunter ceiling fan & light control switch. The switch has a black, blue and red wire w/green ground. The wall outlet has a black, red and white wire with ground. I just wasn't sure which wires...
Trane xl 1200 high speed fan inop
[ 0 Answers ]
I have an older trane xl 1200 and it appears that only one fan speed is working on the outside unit. If my memory serves the unit does have a 2 speed system. The low speed appears to be the only one working. How can I troubleshoot it and repair it?
Air handler fan contactor buzzing and fan inop
[ 10 Answers ]
I have a Rheem air handler and the fan motor stopped working. I replaced the contactor when I heard a buzzing sound coming from it and also the capacitor. Neither lit the fan motor off so I checked to see if there was voltage to the fan and I had voltage at the appropriate wires so I replaced the...
Installing a light kit on a ceiling fan where a switch enables both fan and light
[ 2 Answers ]
I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...
Blower Fan - Central Air - Bryant - INOP
[ 4 Answers ]
Sir/Ma'am, My townhouse uses a Bryant central a/c/gas furnace. The outdoor evaporator fan and compressor work. The indoor blower fan when set to on will begin with a hum -- much like a stuck motor might sound, then time out and shut off. This started with my wife's attempt to start the machine a... View more questions Search
|