Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What causes mold on wall in bathroom behind tolet and straight up the wall?
[ 1 Answers ]
There is mold on the wall where the toilet is located and in patches straight up the wall
Ceiling light using existing wall switch that currently controls a wall outlet plug?
[ 2 Answers ]
I have a bedroom wall outlet plug that is currently switched on/off by an existing wall swtich. I want to set up that switch to turn a new ceiling light on/off and leave the wall plug controlled also by the wall switch. Is this possible and safe to have the existing wall switch control both the...
Remodeling bathroom, problems with sewer hook up.
[ 2 Answers ]
I am remodeling the bathroom and have some questions about hooking up to my sewer line. It's a 1940s house on slab foundation. I removed the tub and jack hammered up the floor and found where the previous owners had used a flexible 2" to 1.5" reducer to connect black abs from the tub and vanity...
240 Volt Wall Heater hook-up
[ 6 Answers ]
I purchased five wall heaters for hook-up in series in my basement. They are 240 volt and I'm setting them to 900 watts - which pull about 4.6 volts each. I've placed a 30amp double circuit breaker in my panel. The heater instructions tell me to run power first to the thermostat, then to heater....
Washer Dryer hook up in bathroom
[ 1 Answers ]
I am installing a stacked washer/dryer in my 2nd floor bathroom. Both units are powered by a single 220 V line. Question: Does the 220 hookup need to have GFI protection since it is in the bathroom? Do GFI recepticles even exist for 220 V? Regardless, is there a height from the floor... View more questions Search
|