Ask Experts Questions for FREE Help !
Ask
    twokmama's Avatar
    twokmama Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 10, 2011, 05:43 AM
    Where is the crankshaft position sensor on a 1989 nissan sentra?
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Feb 10, 2011, 06:17 AM
    On your car, the Crankshaft Position Sensor (sometimes called the Crank Angle Sensor) is inside the distributor.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    Feb 10, 2011, 06:54 AM

    Inside the distributor. On most cars of this generation, the internal distributor sensors (CKP, TDC, and CYL) are not serviceable. Therefore, you will likely have to replace the distributor housing. It's best to go OEM.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Nissan Frontier crankshaft position sensor replacement? [ 8 Answers ]

Hello All, First time here, hope someone can help me, and I look forward to assisting others in the future. I have a 2000 Nissan Frontier with a 3.3L V-6, automatic transmission. Recently, it has a problem. The truck starts fine, idles and runs OK for the first 10 minutes, but after that it...

1997 chevy cav. Crankshaft position sensor change [ 1 Answers ]

Can we see a diagram that would help with this?

1989 honda civic. (code 4)crank angle sensor.(code 8) tdc position sensor [ 0 Answers ]

The car idles randomly after warm up.I check the ecu for codes and it gives 4 crank angle sensor and 8 tdc position sensor. I did a search and one of the ad posted by a guy in Canada says that he had to get part from different vehicles until he got all of them to work properly. Will I be able to...

View more questions Search