Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Sub panel must be grounding and bonding
[ 2 Answers ]
Proper grounding of a sub panel
[ 3 Answers ]
Where in the NEC 2008 are the instructions for the proper grounding of a sub panel within the same residential building?
Sub Panel Grounding
[ 13 Answers ]
How about if there are only 3 wires in a conduit. Can it be used only as 110v and take one of the hot wires, wrap it with green tape and use it as the equipment ground? An inspector also told me if the panel is in a separate detached building, a ground rod could be used and then you would treat...
Grounding 3-wire panel in detached garage
[ 8 Answers ]
I went to install a breaker for an outlet in my detached garage. It has a Square D Homelite panel with a bar at the bottom that connects two nuetral/ground bars, one on each side of the breakers. There are nuetrals and equipment grounds in each of the bars from outlets and such. There is only...
Grounding to Electrical Panel
[ 1 Answers ]
I have two 200 Amp meters on a pedistal 10' away from my house foundation. Each will be connected to their own 200 Amp breaker panel with 2" PVC. What is the NEC code for grounding each of these panels. Must each have their own ground rod with #4 bare or can I come from one Ground rod to another 6'... View more questions Search
|