Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet flange height too high?
[ 7 Answers ]
I have a question regarding the allowable height of a PVC toilet flange above a tile floor. The Oatey screw and set PVC flange insert into my 3" cast iron waste line sits on top of my new tile floor. The thickness of the flange top is 1/2" . So the flange height is 1/2" above the floor level. ...
Closet flange too high
[ 1 Answers ]
I'm redoing a bathroom floor and have a problem where the closet flange is going to be too high. The original floor was a mortar-bed tile installation, so the bottom of the flange is 1.5" above the plywood subflooring. The new floor will be backerboard/thinset/tile, and I think it will only be...
Toilet Flange too high
[ 4 Answers ]
Please Help! I am installing a new KOHLER toilet and I have purchased a new PVC toilet Flange which sits inside of my waste pipe, I primed and sealed it to the existing waste pipe and it sits too high off the floor, the toilet will not go to the floor with this type of flange, and if I saw it off...
High Flange
[ 5 Answers ]
I recently noticed water damage on the ceiling directly beneath one of my 2nd floor toilets and decided to inspect it. After removing the toilet I found the wax seal was compromised due to a lack of clearance between the toilet and the flange. I've tried installing one of the o-ring and gasket...
Flange too high
[ 6 Answers ]
Hi - We have a roughed in two piece bathroom in our basement. We had a plumber come in yesterday to run the water lines. He told us that the flange is "way too high" and wants to break the concrete and lower the flange. Is this really necessary? We are thinking of putting carpet in there which... View more questions Search
|