Ask Experts Questions for FREE Help !
Ask
    ssteele's Avatar
    ssteele Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 31, 2009, 09:27 AM
    York furnace troubleshooting- getting code #8 Ins lockout due to recycle?
    I have a York model P2MP020n11201A
    BLowing lukewarm air. Giving a code #8 INS lockout due to recycles. Thermastat reads 55 degress. Shuts off in 10-15 minutes.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Dec 31, 2009, 01:27 PM
    Turn off the power to unit at the breaker wait a minute and turn back on, this should reset /take it out of lockout,, watch it close does it still give the same code?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York furnace flash error code 6 times (blowing cold air) [ 3 Answers ]

Hello, I have a York (forced air) gas furnace that's 9 years old. Every winter it seems like I have to replace the pressure switch ( round switch with 2 connections & air hose). I hear the blower come on, burners ignite and then within a few seconds they go off with the red light flashing 6 times....

York furnace troubleshooting [ 4 Answers ]

York 92 % eff. Furnace will only start & run when I fill the inducer to trap hose with water. Will run about two to three hour and then shut down on # 3 error ( pressure switch) .Please help!

York furnace troubleshooting [ 4 Answers ]

My York gas furnace is not heating and the red light blinks intermittently 3 times. Fun is working. Anyone knows what to do? Thanks

What is york furnace flashing green code [ 0 Answers ]

Changed thermostat. Now York gas forced air furnace has a flashing green code on PC board. Thermostat says heat is on, but furnace will not run. Fan will also not run in "on" position, but did earlier before setting the thermostat setback values

Trane Furnace error code = 2 flashes, what does system lockout mean? [ 1 Answers ]

I have a Trane forced air furnace which recently has had periods when it blows unheated air. When I looked at the furnace during these periods it shows 2 flashes, which according to the instruction manual is an error code which means: System lockout, retries or recycles exceeded. I don't...


View more questions Search