Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Propane Furnace won't start no pilot light red light flashes 3 times
[ 6 Answers ]
My propane furnace G6RC has no visible flame and the red light either stays on or flashes 3 times in a row and then the furnace shuts off and tries to restart
Trane furnace xe 60 pilot light on but only blowing cold air
[ 4 Answers ]
My Mother-in-law has a Trane XE60 furnace & the pilot light is blue but only blows cold air when the thermistat is at the on position. When the thermistat is set to auto at 80 degrees nothing happens. She thinks the pilot light might be a bit weak. I've seen in some of my research that there is an...
Tempstar NTG3100GFA1 Furnace No Pilot/No Flame/Blowing Cold Air
[ 1 Answers ]
I live in Minnesota and have a 10+-year-old Tempstar NTG3100GFA1 furnace. It uses natural gas and is a split system. It also has a vanEE air exchanger and in-line humidifier with a programmable Honeywell thermostat. 1 1/2 months ago the furnace stopped working - the blower was blowing cold air...
Furnace Pilot Light Keeps Blowing Out. Any Tips or Tricks to Keeping It Lit?
[ 3 Answers ]
Hi! The pilot light on my very old model Heil gas central warm-air furnace keeps blowing out when it gets very windy. Are there any tips or tricks to keeping the pilot light from blowing out? Thanks!
Door 'Cushions' or 'sausages' to stop wind blowing in? What filler should one use?
[ 6 Answers ]
I wonder what you call these? I am looking for a suitable filler to fill in these door stops/wind breaks - basically fabric tubes that sit on the floor of the door to stop the cold from coming in - would one use river sand? Can anyone help? Thanks:confused: View more questions Search
|