Ask Experts Questions for FREE Help !
Ask
    leelon's Avatar
    leelon Posts: 4, Reputation: 1
    New Member
     
    #1

    Sep 20, 2009, 07:14 PM
    I was removing my submersible pump and had removed about 45ft of pipe the well is 150ft when it fell back into the well, how do I continue to remove the pump with out this happening again also the pump seems to be stuck?:(

    Quote Originally Posted by hkstroud View Post
    If I were going to try to fabricate a tool for this, I think it would look something like this.
    Thank you. We are going to try this, keep your fingers crossed.

    Quote Originally Posted by jlisenbe View Post
    How much was the pro going to charge?

    How far down is it to the top of the well pipe? Can you see it?
    Around 2000. We can not see the pipe we think about 40 to 50 ft down.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Sep 20, 2009, 08:06 PM

    What's the size and kind of well casing. What's the size and kind of well pipe. Hopefully you have a good safety rope. Is the any slack in safety rope?
    leelon's Avatar
    leelon Posts: 4, Reputation: 1
    New Member
     
    #3

    Sep 20, 2009, 08:23 PM
    Quote Originally Posted by hkstroud View Post
    What's the size and kind of well casing. What's the size and kind of well pipe. Hopefully you have a good safety rope. Is the any slack in safety rope?
    Well casing is aprox. 9in steel the well pipe is 1 in galvanized steel the safety rope broke
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #4

    Sep 20, 2009, 08:29 PM

    Well I guess it's time to call a pro. Surly, this has happen to them and they may have a solution. Probably going to take special equipment and tools.. Sorry.
    leelon's Avatar
    leelon Posts: 4, Reputation: 1
    New Member
     
    #5

    Sep 20, 2009, 08:55 PM
    Quote Originally Posted by hkstroud View Post
    Well I guess it's time to call a pro. Surly, this has happen to them and they may have a solution. Probably going to take special equipment and tools..Sorry.
    Thanks for your time. The reason I was doing this on my own was because I don't have the money that the pro's quoted I was hoping that someone would have an idea that I could try because I still don't have the money
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #6

    Sep 20, 2009, 10:04 PM

    Hopefully someone may have some ideas. But think what about happens when 100' of galvanized pipe filled with water, falls 50'. Pump has to be buried in the bottom of the well. Got to have something that will line up and clamp around the well pipe. Hopefully the top end of the pipe is still in the casing. Good luck.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #7

    Sep 21, 2009, 03:39 AM

    How much was the pro going to charge?

    How far down is it to the top of the well pipe? Can you see it?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #8

    Sep 21, 2009, 03:42 AM
    For openers you could get a better rope, fashion a small grappling hook, (see image) and go fishing. Good luck, Tom
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #9

    Sep 21, 2009, 07:03 AM

    If I were going to try to fabricate a tool for this, I think it would look something like this.
    Attached Images
     
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #10

    Sep 21, 2009, 07:45 AM
    I like Harolds solution much better then mine. Let us know how it works for you. Good luck, Tom
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #11

    Sep 21, 2009, 01:13 PM
    Quote Originally Posted by hkstroud View Post
    If I were going to try to fabricate a tool for this, I think it would look something like this.
    Quote Originally Posted by leelon View Post
    thank you. we are going to try this, keep your fingers crossed.
    If it works I want a pizza
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #12

    Sep 21, 2009, 01:29 PM

    2000 to simply pull the pump is completely crazy. They can do it in an hour or two. It costs around $200.00 here. If you put a funnel shape down the well as you describe, why not simply have a threaded pipe section attached to the funnel and screw it into the top of the well pipe? Still, I do like your idea IF the clamp will hold well enough.

    For the future, if your pipe is in 20' sections, the pros will pull twenty feet until a joint is two or three feet up, clamp at the bottom, unscrew the section, and then repeat the process until it's all out.


    HK, if you save the guy two grand, then you should get a couple of Kansas City ribeye steaks!
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
     
    #13

    Sep 21, 2009, 01:53 PM
    Quote Originally Posted by hkstroud View Post
    If it works I want a pizza


    Pizza? I would think patent.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #14

    Sep 21, 2009, 03:52 PM

    Amen!
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #15

    Sep 21, 2009, 05:05 PM

    What you have experienced is a WORST CASE senerio when pulling a pump. Normally you would have to get a backhoe, dig down and cut off the well casing, so you can get a good grip on the pipe, then pull the pump, weld casing back on.. this is why you have been quoted 2000 dollars. There is not a grapple that has been invented to grab that kind of weight, and trying to thread a pipe on that far below ground would be a lost cause. You are in a very bad position here. You can try home made tricks all day and all week, ( and I truly hope you can find one that works),but I fear you will be wasting your time.

    With the pipe that far underground, even a backhoe is pretty much out of the question.

    I can only think of one other possible solution,(and it isn't cheap either, but a lot cheaper than 2000). You said your well casing was 9 inches?? If this is true, you have enough room to install a new pump(leave the old pump and pipe where it is, and submerge a new pump down to the depthe the old pump was at. Using black poly(plastic) pipe this time. In a nine inch casing the submersalbe pump will fit past the old one inch galve line, it may take some pushing , but it will fit. Old pump and pipe will not affect well performance, so you won't have to worry about pulling them any longer. Good luck and let me know if this makes sense. Lee.
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
     
    #16

    Sep 22, 2009, 05:20 AM
    Quote Originally Posted by hkstroud View Post
    If I were going to try to fabricate a tool for this, I think it would look something like this.

    Harold, I love this idea. I was wondering, if instead of a spring loaded clamping, could you draw the pull-up hook point as a dog that gets tighter the harder the pull? Unlike you, I do well to draw a cool glass of water. Lol
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #17

    Sep 22, 2009, 08:20 AM

    I wouldn't use black poly. I'd go with PVC. But that is an interesting idea to simply stick another pump in.

    My understanding was that the 2000 dollar figure was for pulling the pump before it was dropped into the well, not afterwards.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #18

    Sep 22, 2009, 09:36 AM

    I think I would want the spring if possible. Once engaged the weight would keep it locked in but knowing when to engage would be difficult. What I kind of envision would be a piece of 2” pipe about 3 to 5' long with the funnel on one end and a reducing coupling on the other. Screw this on the well pipe and send it down the casing. When you reach the pipe in the well you will want to be able to rotate the funnel to guide the pipe toward the center and into the 2”. This rotating may foul the engaging cable. Hopefully you will have taped the cable to the side of the pipe. The tooth or dog should have teeth cut into it similar to the teeth of a pipe wrench. Does the pipe in the well have a coupling on the end of it? If so that should help in engaging the dog. Making the funnel will be the hard part. Might be able to find a really heavy duty funnel to weld onto the end of the pipe.

    Using 1” iron pipe, you aren't going to be able to tell by feel if and when you have contacted the pump pipe. As a test run, I think I would try to rig up a funnel on the end of a piece 2” PVC reduced down to 3/4 or 1 and send that down to determine the depth. You should be able to tell when you hit the pump pipe by feel. Cover the open end of the funnel with masking tape. Put something like a sponge in the end of the 2”. When you pull it out you tell if you engaged the pipe by the torn masking tape. If you have pushed the sponge up the 2” you have guided the pump pipe into the 2”. Be sure that the funnel is well attached to the PVC, you don't want to lose something else down the well.

    What kind of set up did you have to pull the pump? Surly you weren't trying to pull 150 of 1” galvanized pipe by hand.
    Attached Images
     
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
     
    #19

    Sep 22, 2009, 10:03 AM
    What kind of set up did you have to pull the pump? Surly you weren’t trying to pull 150 of 1” galvanized pipe by hand.[/QUOTE]


    Harold, That drawing is it, thanks. Also this in not my thread, but a few years ago we lost a pump in the same manner as this, after trying to hook it with homemade grappling hooks with no success, the owner decide to quit the well and connected to community water service. May try to build your device and try to recover the old pump. What I envision doing is, using the 3 to 5 foot long device, on a good drop rope (that way I'll know when I hit the pump pipe). I plan on hooking 5/16 steel cable on the dog where you have your spring hooked, and thread the cable through a pulley attached to a tri-pod that we use to pull car engines, and let the four-wheeler do the work. I'll be sure and let you know the outcome, one way or the other. Thanks again for the drawing, now to the shop and see what comes out.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #20

    Sep 22, 2009, 11:17 AM

    Parttime
    Good luck wish you well (pun intended). I think I would want it on the end of a pipe so I could turn the funnel to guide the pipe toward the center. Maybe you want to put it on the end of PVC pipe, then use cable to pull out.

    Here is what I think I would build for the "test run". If it worked I think I would then cut off the PVC just above the reinforcing straps, add a threaded adapter and screw onto black pipe. Then have dog in iron pipe. Rest of pipe could be PVC if you are going to use cable to pull. Only problem with iron pipe all the way is weight.
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Why my circuit breaker keeps tripping in a submersible water pump? [ 13 Answers ]

We live in the lower Hudson Valley of New York State where currently we're getting lots of rain. Is it possible that something happened to the wiring causing a short circuit? Water pump will trip 20-25 seconds immediately after being reset. Right afterward, it will trip again within 10-15...

Submersible water pump [ 8 Answers ]

Our water comes from a deep well, and at this time we don't have enough water pressure. I was told that the submersible water pump needs to be replaced but I doubt because it is working. I would like to know how I can fix the problem, and if the pump needs to be pulled out then I need ideas of...

Submersible Water pump Lag time in turning on [ 1 Answers ]

We have a manufactured home with an assume submersible pump as we cannot find another pump anywhere. Our water will run for several minutes but then stops and there is a few minute lag before the pump triggers to come on then the water flow returns. What is the problem and how do we solve it. ...

Submersible water pump trouble [ 4 Answers ]

I have been having trouble with my water so I bought a new water pump, it's the submersible type for a well. The water would work for a short time then just stop. The new water pump does the same thing. I can't find anyone who can tell me what the problem is. The bladder tank pressure is reading 32...

How can I get the old submersible pump out? [ 3 Answers ]

Hi, I asked the submersible pump question a while ago and speedball1 helped me a lot. I have additional question now. I have located the well. Can you tell me the steps to pull the pump out? Is it doable for an layman like me? I am pretty comfortable to explorer things but would like to...


View more questions Search