Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
One power source, two switches
[ 2 Answers ]
If I have one power source coming in, do I just pigtail the black wire to the two swtches and wire nut the white wires together? Also do I pigtail the ground to the switchor just wire them all together?I am running 12-2 wire. And controlling two different light sources. Also on 15amp breaker,...
How to wire switches
[ 5 Answers ]
I live in a old house found out a switch was bad I shut off the power and went to put a new switch in it has 12 3 wire Running to for power and 12 2 out to lights but the old switch was a singel pull My question is I wired it back the same what I thougfht but it does not work right I have...
Power feeds for two switches?
[ 4 Answers ]
I am wiring my basement and I have two dimmer switches in one double receptical, do I need two power feeds to power the lights or is their away to do it with one? I am using 14/2 wire.
Is this the correct way to wire 2 switches?
[ 4 Answers ]
Hi, I am remodelling my bathroom and I am putting in a new light fixture and fan where they did not exist before, so I am running new cabling as well. If I have two switches in one box, one to control the fan and one to control the light - do I need two separate power lines into the box (one for...
No power to outlets/switches
[ 1 Answers ]
Hi, I have an electrical issue in my kitchen. I have 3 GFI's (one of which operates), 1 standard outlet and 2 switches (one which operates an exhaust vent and one for an overhead fluorescent light and the disposal. I only have current to the one GFI. The breaker is not tripped, nor is it hot to... View more questions Search
|