Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacement for copper toilet flange
[ 8 Answers ]
Next step in my bathroom remodel is getting the floors up and new floors down. I have a 3" copper toilet drain with a copper flange soldered to it. I know I can use a torch to get the flange off. But, what should I replace it with when I get my new floor in. I am having a hard time locating...
Removing 1 1/4" Copper Drain Pipe From Main 4" Drain
[ 1 Answers ]
I discovered a big hole behind the drywall in my copper drain line about 3/4' from the main 4" Drain... I need to disconnect the fitting... which direction is the thread... it is in there really tight and is difficult to loosen.
Connecting to 1 1/2" copper drain with pvc kitchen sink drain trap
[ 8 Answers ]
I'm trying to rehook up the kitchen sink pvc trap to the old copper drain pipe but the connector doesn't fit tight enough and the water links out. Any ideas how to stop this leak?
Copper sink drain too slow, not clogged which type drain is best
[ 2 Answers ]
We just refinished bathroom with double vanity copper sinks. They have a flat grid drain in the bottom, not vented. Is there a different drain that would allow the water to drain easier? We have to swirl water or stir water to get it to begin draining, like there is a suction...
PVC to old copper drain
[ 3 Answers ]
I would like to know the best way to transition a 2" ABS pipe to a 1.5" copper drain pipe. The 2" drain will be attached to a shower drain. An image of the current drain system is attached. Originally, I was planning to use the copper to ABS adapter sold at HD. Would there be any issue... View more questions Search
|