Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Plumbing air lock in hot water system
[ 15 Answers ]
Yellow! I have a comparatively modern house (built 1975) in Eastern Cape, South Africa. T has a non-pressure geyser (boiler) fed by a ballcock system which always develops air lock after 3 minutes running the bath. The outlet pipe is slightly upwardly orientated -which looks wrong. Could this be...
Air lock on heating system
[ 1 Answers ]
I have a Hot Water zoned heating system. All zones are flowing except one. The zone not circulating has a lot of air in it and it appears to have an air lock. I have bled the baseboard radiators but can not seem to get the air lock out - it will not move. What can I do to get this circulating...
Slushing noise in two zoned heating system
[ 1 Answers ]
I have two zoned hot water baseboard heating. There is air in one of the zones (slushing noise). The zone lever is set on closed. I tried reversing one of the lever close valves, which put it in an open position. Then I drained using the blue drain valve. When all done, I turned the lever gate...
Zoned heating system problems
[ 4 Answers ]
I need help with information about my current heating system, I will try to be as brief as possible. We built a 5200 sq ft duplex home (2600 each side), with 4 levels. The heating contractor told us he could put in 4 zones, one for each floor. We moved in late fall of 2006 and discovered the...
Water heating system
[ 1 Answers ]
I am building a new home (2800 sf each level main and basement) and will be doing a manifold distribution system with PEX piping. With the length of the house, I was planning on a two water heater system. Both 50 gal electric plumbed in tandem. If this seems feasible, would I just supply the... View more questions Search
|