Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring for a hunter 44110 thermostat
[ 3 Answers ]
My old therostat has two wires. I don't know where they hook up at in the hunter I bought the old wires are a red one and a white one I the old therostat is a robertshaw any help would be great
40 yr old Carrier Weathermaker thermo to Hunter 44110 programmable
[ 3 Answers ]
40 yr old Carrier Weathermaker thermo to Hunter 44110 programmable -------------------------------------------------------------------------------- Carrier is a 9 wire 40 yr old round thermostat. I had a programmable years ago and just matched the color code, didn't like it and took it off....
Problems wiring Hunter 44110 thermostat
[ 1 Answers ]
I just bought a Hunter 44110 thermostat for an old gas wall heater. Only two wires came out of the wall and were unmarked (even the old thermostat didn't identify + and ground). I have read the instructions and connected one wire to ground and the other wire to RH. Note there is a jumper between...
Hunter thermostat 44110
[ 2 Answers ]
I have hot water baseboard heat, and installed the hunter digital thermostat 44110, and followed the directions as directed, I had had wires W, Y and RH, I marked and installed Each of the wires, and put them where they were marked on the thermostat. I felt well and all of the lights ( temp,...
Hunter 44110 Programmable Thermostat Wiring HELP!
[ 3 Answers ]
My current thermostat has the following six wires, hooked as follows: Orange to O Green to G Yellow to Y1 Red to R Black to C White to W1 I am attempting to install the Hunter Programmable thermostat, which only gives me 5 placements for wires: View more questions Search
|